• Directive 94/9/EC
  DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Guidelines on the Application of Directive 94/9/EC
• Harmonised standards under the directive 94/9/EC (03.2014)
• Directive 1999/92/EC
  DIRECTIVE 1999/92/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres
• Guidelines on the Application of Directive 1999/92/EC
  Non-binding Guide of Good Practice for implementing of the European Parliament and Council Directive 1999/92/EC on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres
• Guide to application of the Machinery Directive 2006/42/EC
• Guide to application of the PPE Directive 89/686/EEC

List of EC-type examination certificates for gas detection equipment with a measuring function for explosion protection, issued by DEKRA Testing and Certification GmbH, by DEKRA EXAM, GmbH, EXAM BBG Prüf- und Zertifizier GmbH or Deutsche Montan Technologie GmbH. (Last update: 30/06/2023)

• List of EC-type examination certificates for gas detection equipment

Procedure for re-examination EN 353-1

• EN 353-1:2002
  EN 353-1:2002: Procedure for re-examination as agreed by the German coordination group of the notified bodies for PPE against falls from a height.
• Mustertabelle Gefahrenbewertung EN 353-1

• FRM-90.103.05
  Special Conditions and Procedure Guidelines for Product Certification
• FRM-90.104.03 (will be published soon)
  Special Conditions and Procedure Guidelines for produced Product Certification
• FRM-90.105.04
  Special Conditions and Procedure Guidelines for the Certification of Management Systems

The standard DIN EN ISO/IEC 17025:2018 (General requirements for the competence of testing and calibration laboratories) requires an accredited testing laboratory, when stating conformity with specified requirements (e.g. pass or fail of a specification or standard), to specify the rule describing how the uncertainty of measurement is taken into account in these cases, is

• agreed with the customer and
• stated in the report.

The document available for download therefore informs you about our procedure. You are also welcome to agree an individual decision rule with us. For this purpose, please contact your contact person in our company.

Download